The Sync Smart Home Alarm 6 Piece Kit puts you firmly in control, giving you total peace of mind that your home is secure and protected. Unlike a traditional home alarm system, the Sync Smart Home Alarm range allows you to check-in from anywhere in the world and receive real-time alerts in the event your alarm is activated.
The handy geolocation feature on the Sync Smart Home Alarm 6 Piece Kit reminds you to set the alarm when you leave home, giving you one less thing to worry about. Intelligently connected, the Sync Smart Home Alarm 6 Piece Kit works with Philips Hue, Google Assistant and Amazon Alexa, combining lights and voice to create the ultimate security deterrent. Tailored to suit your needs, the Sync Smart Home Alarm range lets you to either fully arm or partarm your home alarm system. You can do this via the Smart Living Alarm App, keypad, remote key fob and with leading voice assistants – “Alexa, arm my alarm.”
With home security at the forefront of its design, the Sync Smart Home Alarm range has been awarded the BSI IoT Kitemark, guaranteeing it has achieved the highest level of security for internet-connected products, providing users with a label of trust. To achieve this BSI IoT Kitemark, our smart alarm systems have undergone rigorous testing to ensure they function and communicate as they should, and that the appropriate security controls are in place.
Secured by Design, the official police security initiative that works to improve security of buildings and their immediate surroundings have accredited the Sync Smart Home Alarm 6 Piece Kit under the Police Preferred Specification scheme.
The Sync Smart Home Alarm 6 Piece Kit is wire-free, eliminating the need for cables running through your property like with a traditional wired alarm system*. This means that you have the flexibility to take your home alarm system with you, if ever you move. It is also expandable, so you can design the perfect security solution to suit your home. You can add extra door and window contacts, PIR sensors, smoke alarms, smart plugs, keypads, water leak sensors. You can add up to 40 accessories and connect them seamlessly to your Sync Smart Home Alarm 6 Piece Kit.
What's in the box? The Yale Sync Smart Home Alarm 6 Piece Kit comes with:
1x Smart Hub
1x Yellow Siren
2x Motion Detector
1 x Door/Window Contact Sensor
1x Keypad
Forget about long-term contracts, when you purchase the Sync Smart Home Alarm 6 Piece Kit you aren’t tied into any monthly rolling or monitoring fees.
*Please note: the Yale Sync Hub will need to be connected to your Wi-Fi Router via an Ethernet cable & plugged into power.
Integrates with Philips Hue lighting
Works with leading virtual assistants
Check the status via your smart watch
How do I install my new Yale Sync Smart Home Alarm 6 Piece Kit
Please follow the ‘quick start guide’ included in your alarm kit. All accessories within the alarm kit are pre-linked and wire-free, making installation quick and simple. You will need to download the Smart Living Alarm App to create an account and configure your alarm settings. Alternatively, you can watch our ‘how to install’ tutorial here
Need a little help with installation? We’ve got you covered. We understand that not everyone has the time to install their new smart alarm system themselves, so enjoy optimum installation with minimal inconvenience with our professional Yale Alarm Installation service.
Does the Yale Sync Smart Home Alarm work with any other devices?
Yes. The Sync Smart Home Alarm 4 Piece Kit is now Amazon Alexa certified, which means it works seamlessly with Alexa. You can ask Alexa to fully arm your home, part-arm areas or give you a status update of your home security.
You can also integrate Philips Hue lighting with your Yale smart alarm system, giving you the power of both a visual and audible deterrent. In the event of an alarm activation, the Philips Hue lights will flash red, working to startle the intruder as well as alerting neighbouring properties and passers-by of a disturbance.
What happens if my internet goes down?
Your alarm will remain in the same state as it was before the connectivity issues. The communication between your Yale Smart Hub and devices is on a wireless frequency that does not rely on an internet connection, so the system will continue to operate as normal however, you would need to arm or disarm your system via a physical accessory such as a keypad or a key fob until the internet connection is reconnected. Please note that without an internet connection to your Yale Smart Hub, you will not be able to operate the alarm via the Yale Smart Living Alarm App.
Can I part arm my Yale Sync Smart Home Alarm?
Yes. You can configure the ‘part-arm’ settings in the Yale Smart Living Alarm App so that specific devices will not set off the alarm when in part-arm mode. You have full control so you can freely change these settings if required at any time, without the need to move your accessories.
How often will I have to change the batteries in my Yale Sync Smart Home Alarm?
The batteries should last for approximately 18 to 24 months. To change the batteries in your accessories, go to the Yale Smart Living Home App, select the device that needs new batteries and follow the battery change instructions.
Full in-app control
The Yale Smart Living Alarm App gives you full control of your Sync Smart Home Alarm 6 Piece Kit and connected devices. Check-in from anywhere in the world, receive alerts and real-time notifications in the event that your alarm is triggered. You are also able to control and check the status of your smart alarm system through your Smart Watch.
Please note: To ensure that your Android device supports the required app for this alarm system, please search for the "Yale Alarm" app on the Google Play or the App Store, using the mobile device that you are intending on using the system with.
The Yale Alarm app is only supported on Android 11 or above and iOS 13 onwards.
The perfect pairing
Seamlessly integrate your Yale Sync Smart Home Alarm and Yale Smart Lock with the Yale Sync Module, creating the perfect pairing between the two systems. You can automatically disarm your alarm when opening the lock (although your alarm cannot be armed by locking).
Hassle-free installation
Within 72 hours of purchase, you will be contacted to arrange a convenient time and date for installation.
All of our Professional Installers are trusted Yale Smart Security Partners, they have been trained by Yale and have had their backgrounds checked. On purchase of the product with installation, one of our local Partners in your area will contact you to arrange a convenient time and date for the installation to take place. They will answer any questions you may have and will also be able to explain what to expect on the installation day.
Alarm installation only covers up to 13 alarm accessories (excluding the powered siren). You must purchase the product prior to installation. Please note, sirens can only be installed up to a height of 3m.
Unfortunately, professional installation is not available in the following postcodes: HS, IM, IV, GY, JE, KW, PA and ZE.
Extended Warranty
Ensure your Sync Smart Home Alarm 6 Piece Kit is protected for longer by purchasing our 1 year extended warranty. This guarantee protects your purchase against material and functional failures for 3 years (vs. our standard 2 year guarantee). Your extended warranty must be purchased alongside the relevant product to be valid.
Make sure to keep your proof of purchase safe, as this will be required if a claim is made. For full terms & conditions, see here
